Basic info
- Half pipe
- material: strong
- measures: ⌀ 152mm, height ~ 90 mm
- holes: 9 holes ⌀ 10mm in Ikego grid
Tolerance
- Size: standard tolerance
- Material: standard tolerance
Get this part
- Buy: Available as local make.
- Make: This part is very easy to make! Our prototypes were made from standard off the shelf KG drain pipes (160mm) from PVC. You can cut these pipes with a metal saw and drill it like wood. But maybe you can think of another way? | How to get the holes? Use a strap like 038.1 to figure out the distance from center to sides. The holes in the center are in the center of the part as well, facing 90° downwards when the part stays on “its feet”.
Introduced by
- Lars Zimmermann via Lamp Moe
- Original post, original post backup.pdf
- Open: Shared under TPP 1.0
- Disclaimer
Download Portal
Most parts have open design and manufacturing files you can download and work with.
0P3N Portal
More Parts
147.1 – Board 690x330x16mm
142.3 – Board 330x330mm, ⌀6mm holes
124.2 – Pocket medium 400x300x100mm
080.1 – “Addi” board ~390x390mm
027.1 – Rubber band ring ~150mm
063.1 – Plate 210x330mm
122.1 – board ~360x150mm
051.1 – Saddle washer for KG pipes, ⌀30mm
112.4 – 300mm rod with M4 insert threads
017.1 – Tube 240mm long, ⌀ 10mm
125.3 – Foam small 400x200x50mm
081.1 – Board ~210x390mm
Pl⚲y (ノ✿◠‿◠)ノ .-‘ °
Do you have any new ideas on how to re-use these parts? Share it.