Basic info
- A strap
- material: bendable but strong
- measures: ~ 300 mm x ~ 30 mm x ~ 0,8mm
- holes: Ikego grid, 5mm holes
Tolerance
- Size: standard tolerance
- Material: standard tolerance
Get this part
- Buy: Available as local make.
- Make: This is easy to make. We recommend PP (Polypropylen) 0,8 mm or 1 mm for it. PP can be cut by hand but you can also use a laser cutter. For this we share laser-cut-ready files: Download svg files
Introduced by
- Lars Zimmermann via Flower Hanger
- Open: Shared under TPP 1.0
- Original post (9), original post backup (9).pdf
- Disclaimer
Download Portal
Most parts have open design and manufacturing files you can download and work with.
0P3N Portal
More Parts
021.3 – Disk ⌀ ~75mm, 6mm holes
124.2 – Pocket medium 400x300x100mm
094.1 – M6 threaded rod 50mm
144.1 – Wire mesh, not bendable, 300x300mm
034.1 – Spacer ~40mm high
142.1 – Board 330x330mm, no holes
095.5 – 210mm rod with M6 insert threads, ⌀ ~30mm, “elephant rod”
061.1 – Bendable plate ~60x60mm
113.1 – Hinge 1, ⌀ 6mm holes
065.1 – Board 330x360mm
129.3 – Rod, M6 insert threads, 120mm, ⌀ ~50mm
044.1 – M4 wing nut
Pl⚲y (ノ✿◠‿◠)ノ .-‘ °
Do you have any new ideas on how to re-use these parts? Share it.