Basic info
- A strap (“PP bracket”)
- material: bendable but strong
- measures: ~ 60 mm x ~ 30 mm
- holes: Ikego grid, 2 holes ⌀ 4 mm
Tolerance
- Size: standard tolerance
- Material: standard tolerance
Get this part
- Buy: Available as local make.
- Make: This is easy to make. We recommend PP (Polypropylen) 0,8 mm or 1 mm for it. PP can be cut by hand but you can also use a laser cutter. For this we share laser-cut-ready files: Download file.
Introduced by
- Lars Zimmermann via Backpack MF
- Open: Shared under TPP 1.0
- Original post (23), original post backup.pdf (23)
- Disclaimer
Download Portal
Most parts have open design and manufacturing files you can download and work with.
0P3N Portal
More Parts
001.1 – Rod 390mm long ⌀ 16mm
087.1 – M6 washer 20mm
085.1 – Thread insert M10
094.2 – M6 threaded rod 80mm
097.1 – board 240x300mm
072.1 – Spacer ~15mm high
107.1 – Beam 450x30x30mm
004.1 – Washer disk ⌀ 40mm
135.1 – 5 corner bracket Round
059.1 – Plate 390x270mm
105.1 – Triangle ~70mm
006.1 – Wire 500 mm long, 2mm thick
Pl⚲y (ノ✿◠‿◠)ノ .-‘ °
Do you have any new ideas on how to re-use these parts? Share it.