Basic info
- A strap
- material: bendable but strong
- measures: ~ 180 mm x ~ 30 mm
- holes: Ik3go grid, 6 holes ⌀ 4 mm
Tolerance
- Size: standard tolerance
- Material: standard tolerance
Get this part
- Buy: Available as local make.
- Make: This is easy to make. We recommend PP (Polypropylen) 0,8 mm or 1 mm for it. PP can be cut by hand but you can also use a laser cutter. For this we share laser-cut-ready files: Download file.
Introduced by
- Lars Zimmermann via Backpack MF
- Open: Shared under TPP 1.0
- Original post (22), original post backup pdf (22)
- Disclaimer
Download Portal
Most parts have open design and manufacturing files you can download and work with.
0P3N Portal
More Parts
080.3 – Board ~390x390mm
010.1 – Cable with plug and switch
117.1 – 15° bend, 120mm high
142.1 – Board 330x330mm, no holes
054.1 – Bendable “lid” 330x270mm
101.2 – Bead ⌀ ~16mm, ⌀ 6mm hole
130.1 – “Flappy beam short” 240x80x18mm
013.1 – E14 bulb holder
115.3 – 2 corner bracket modified Round +
078.1 – Beam 210mm
124.2 – Pocket medium 400x300x100mm
048.2 – Tube 60mm ⌀152mm
Pl⚲y (ノ✿◠‿◠)ノ .-‘ °
Do you have any new ideas on how to re-use these parts? Share it.